The front plates are made of 3 mm stainless steel with a brushed surface. Vandal resistant screws and speaker grille protect against damage and the insertion of foreign substances, debris, etc. The front plates are suited for flush wall mount using the UP-030 flush mount box.

Technical data: Integrated 2.5 W power amplifi er (1.5 W over integrated loudspeaker); 8 Ohm loudspeaker with a special membrane for optimal speech reproduction; electret microphone.

EF 031-1

EF 031-1 front plate with piezo button for call/emergency call, microphone and loudspeaker. ...

Details

EF 031-1R

EF 031-1R front plate with piezo button for call/emergency call, microphone, loudspeaker, and additional antenna window for integration of an optional mobile phone detection module. ...

Details

EF 031-2

EF 031-2 front plate with 2 piezo buttons for call/emergency call and light, microphone and loudspeaker. ...

Details

EF 031-2R

EF 031-2R front plate with 2 piezo buttons for call/emergency call and light, microphone, loudspeaker and additional antenna window for integration of an optional mobile phone detection module. ...

Details

EF 031-2M

EF 031-2M front plate with 2 piezo buttons for call/emergency call and light, microphone and loudspeaker. 3 buttons (TCT technology) for music selection and volume control; 6 LEDs for display of music program selection. ...

Details

EF 031-2MR

EF 031-2MR front plate with 2 piezo buttons for call/emergency call and light, microphone and loudspeaker. 3 buttons (TCT technology) for music selection and volume control; 6 LEDs for display of music program selection. Additional antenna window for integration of an optional mobile phone detection ...

Details

Flush in-wall mounting box for accommodation of EF 031x front plates and EB 330 cell electronics. Two diagonally located sabotage break contacts. The flush mount box is to be ordered separately for preparatory mounting.

UP 030

Flush in-wall mounting box for accommodation of EF 031x front plates and EB 330x cell electronics. 5 cable feeds (20 mm diameter) in top and bottom and one in each sidewall. ...

Details

Various electronics modules are available for mounting options 1 and 2 (integrated or remote electronics). Additionally, there are electronics modules with integrated surface sensing with which front plates can be made touch-sensitive for guard alerts etc. As an alternative to the EF 031 series of front plates, analogue intercom modules can be connected. This allows for custom front plate design. Please note: Electronics modules and flush mount boxes need to be ordered separately.

Technical data: External 24 V AC/8.5 VA or 24 – 35 V DC/8.5 W power supply; power consumption: 3.5 W standby, 8.5 W max at 24 V AC (current min. 130 mA/h min. / 350 mA/h max. at 24 V AC); 10 fl oating input contacts; 6 relay outputs (3 breakers and 3 two-way contacts); 60 V DC/VAC – 1A; 30 V DC/VAC – 2A.

EB 330 | EB 330S

EB 330 internal cell electronics module for integrated mounting with terminal connection to an EF 031x front plate. EB 330S cell electronics module with additional surface sensing functionality. ...

Details

EB 330AH | EB 330AHS

EB 330AH external cell electronics module for remote electronics installation with terminal connection to an EF 031x front plate. The module is mounted on a fitting panel suitable for “top hat” DIN rail mounting. EB 330AHS external cell electronics module with additional surface sensing ...

Details

EB 330A | EB 330AS

EB 330A external cell electronics module for remote electronics installation with terminal connection to an EF 031x front plate. The module is mounted in a wall mount housing with IP 54 water resistance. EB 330AS external cell electronics module with additional surface sensing ...

Details

This module detects mobile phone/modem connections using UMTS and GSM networks and are user friendly in terms of installation – plug & play. Depending on the structural conditions of the building, the modules detect a connection within a 20 meter radius. As soon as anyone attempts to make a mobile call, send a text message, or use an internet connection, an alarm is triggered at the station or control desk within the complex on the Commend intercom system. The connections can be located with the aid of the identifi cation number or name of the active module on the display screen. A visual indication, in the form of a lamp for example, is also possible.

HF 100

Build-in module for detecting mobile phone/modem connections, consisting of an antenna, a high frequency and a signal section. The module is equipped with a potential free relay output (break contact) and is enabled for data transfer via the RS 485 port. Installable in EF031-xxR series front panels of detention cell terminals. Typical applications: Prisons, arrest and detention centres in police ...

Details